Stanford DS345 Function & Arbitrary Waveform Generator
(Distributed only in Germany.)
Specifications in Brief
| Frequency Range | |||
|---|---|---|---|
| Freq | Resolution | ||
| Sine | 30.2 MHz | 1 mHz | |
| Square | 30.2 MHz | 1 mHz | |
| Ramp | 100 kHz | 1 mHz | |
| Triangle | 100 kHz | 1 mHz | |
| Noise | 10 MHz | (Gaussian weighting) | |
| Arbitrary | 10 MHz | 40 MHz/n sample rate | |
| Output | |||
| Source impedance | 50 W | ||
| Grounding | Output may float up to ± 40 V (AC + DC) relative to earth ground. | ||
| Amplitude | |||
| Range | 0.01 to 10 Vpp (50 W ), 20 Vpp (Hi-Z) | ||
| Resolution | 3 digits (DC offset = 0 V) | ||
| Sine wave accuracy | |||
| (0V DC Offset) | |||
| 1 mHz-100 kHz | 100 kHz-20 MHz | 20 MHz-30.2 MHz | |
| 5 to 10 Vpp | ± 0.2 dB | ± 0.2 dB | ± 0.3 dB |
| 0.01 to 5 Vpp | ± 0.4 dB | ± 0.4 dB | ± 0.5 dB |
| Square Wave Accuracy | |||
| 1 mHz-100 kHz 100 kHz-20 MHz 20 MHz-30.2 MHz | |||
| 5 to 10 Vpp | ± 3 % | ± 6 % | ± 12 % |
| 0.01 to 5 Vpp | ± 5 % | ± 8 % | ± 15 % |
| Triangle, Ramp, Arbitrary Accuracy | |||
| ± 3 % (>5 Vpp) | |||
| ± 5 % (<5 Vpp) | |||
| DC Offset | |||
| Range | ± 5 V (limited such that |VAC peak| + |VDC| <5 V) | ||
| Resolution | 3 digits (VAC = 0) | ||
| Accuracy | 1.5 % of setting + 0.2 mV (DC only) ± 0.8 mV to ± 80 mV depending on AC and DC settings | ||
| Sine Wave | |||
| Spurious components | <-55 dBc (non-harmonic) | ||
| Phase Noise | <-50 dBc in a 30 KHz band centered on the carrier, exclusive of discrete spurious signals | ||
| Subharmonic | <-50 dBc | ||
| Harmonic distortion | Harmonically related signals will be less than: | ||
| Level | Frequency Range | ||
| <-55 dBc | DC to 100 kHz | ||
| <-45 dBc | 0.1 to 1 MHz | ||
| <-35 dBc | 1 to 10 MHz | ||
| <-25 dBc | 10 to 30 MHz | ||
| Square Wave | |||
| Rise/Fall time | <15 nS (10 to 90 %), at full output | ||
| Asymmetry | <1 % of period + 4 nS | ||
| Overshoot | <5 % of peak to peak amplitude at full output | ||
| Ramps, Triangle and Arbitrary Waveforms | |||
| Rise/Fall time | 35 ns (10 MHz Bessel filter) | ||
| Linearity | ± 0.5 % of full scale output | ||
| Settling time | <1 ms to settle within 0.1 % of final value at full output | ||
| Arbitrary Waveforms | |||
| Sample rate | 40 MHz/N, N = 1 to 234-1 | ||
| Memory length | 8 to 16,300 points | ||
| Resolution | 12 bits (0.025 % of full scale) | ||
| Phase | |||
| Range | ± 7199.999 ° with respect to arbitrary starting phase | ||
| Resolution | 0.001 ° | ||
| Amplitude Modulation | |||
| Source | Internal (sine, square, triangle, or ramp) or External | ||
| Depth | 0 to 100 % AM or DSBSC | ||
| Rate | 0.001 Hz to 10 kHz internal, 15 kHz max external | ||
| Distortion | <-35 dB at 1 kHz, 80 % depth | ||
| DSB carrier | <-35 dB typical at 1 kHz modulation rate (DSBSC) | ||
| External input | ± 5 V for 100 % modulation, 100 kW impedance, 15 kHz BW | ||
| Frequency Modulation | |||
| Source | Internal (sine, square, triangle, ramp or arbitrary) | ||
| Rate | 0.001 Hz to 10 kHz | ||
| Span | 1 mHz to 30.2 MHz (100 kHz for triangle, ramp) | ||
| Phase Modulation | |||
| Source | Internal (sine, square, triangle, ramp) | ||
| Rate | 0.001 Hz to 10 kHz | ||
| Span | ± 7199.999 ° | ||
| Frequency Sweep | |||
| Type | Linear or Log, phase continuous | ||
| Waveform | Up, down, up-down, single sweep | ||
| Time | 0.001 s to 1000 s | ||
| Span | 1 mHz to 30.2 MHz (to 100 kHz for triangle, ramp) | ||
| Markers | Two markers may be set at any sweep point (TTL output) | ||
| Sweep output | 0 to 10 V linear ramp signal, synchronized to sweep | ||
| Burst Modulation | |||
| Waveform | Any waveform except noise may be burst modulated | ||
| Frequency | Sine, square to 1 MHz; triangle, ramp to 100 kHz; arbitrary to 40 MHz sample rate | ||
| Count | 1 to 30,000 cycles/burst (1ms to 500 s burst time limits) | ||
| Trigger Generator | |||
| Source | Single, Internal, External, Line | ||
| Rate | 0.001 Hz to 10 kHz internal (2 digit resolution) | ||
| External | Positive or negative edge, TTL input | ||
| Output | TTL output | ||
| Standard Timebase | |||
| Accuracy | ± 5 ppm (20 to 30 °C) | ||
| Aging | 5 ppm/year | ||
| Input | 10 MHz/N ± 2 ppm. N = 1 to 8. 1 Vpp minimum input level | ||
| Output | 10 MHz, >1 Vpp sine into 50 W | ||
| Optional Timebase | |||
| Type | Ovenized AT-cut oscillator | ||
| Stability | <0.01 ppm, 20 to 60 °C | ||
| Aging | <0.001 ppm/day | ||
| Allan variance (1 s) | <5x10-11 | ||
| General | |||
| Interfaces | Optional RS-232 (300 to 9600 Baud, DCE) and GPIB with DOS based | ||
| Arbitrary | Waveform Software. All instrument functions are controllable over the interfaces. | ||
| Dimensions | 8.5 " × 3.5 " × 13 " (W × H × L) | ||
| Weight | 10 lbs | ||
| Power | 50 W, 100/120/220/240 VAC, 50/60 Hz | ||
| Warranty | One year parts and labor on any defects in material and workmanship. | ||
